Specification

Swing over bed: 430 mm

Swing over cross slide: 240 mm

Center distance (mm): 560.760.1000.1500.2000

Swing over gap: 650 mm

Bed width: 300 mm

Spindle Nose: ASA D1-6/D1-8 (OPT.)

Spindle Bore: 58 mm/78 mm (OPT.)

Taper of spindle bore: MT6/MT7 (OPT.)

Spindle speed: 20-2000 rpm (12 steps) spindle bore: 58 mm

                           40-2000 rpm (12 steps) spindle bore: 78 mm.

Inch Threads Range: 4-56 TPI

Metric Threads Range: PO.6-P7

Longitudinal Feeds Range: 0.05-0.82 mm

Cross Feeds Range: 0.02-0.4 mm

Lead Screw Diameter: 35 mm

Lead screw pitch: 4 TPI or 6mm

Taper of tail center: MT4

Tail spindle travel: 150 mm

Tail spindle diameter: 58 mm

Main Drive motor: 5 HP (3.75 KW)/ 7.5 HP (5.625 KW. Opt.)

Coolant Pump: 1/8 HP (0.1 KW)

Compound Rest Travel: 125 mm

Cross Slide travel: 245 mm

Machine dimension (LxWxH): 165, 189, 215, 265, 317 x 81 x 119 cm

Packing dimension (LxWxH): 1500, 1680, 1760, 2050, 2320 x 95 x 162 cm

Net weight (kgs): 1500, 1680, 1760, 2050, 2320

Gross weight (kgs): 1600, 1780, 1860, 2200, 2470.